> haven't noticed that effect on my K3 and actually when just tested it
> now I don't hear anything other than a very faint click when the
> speaker switches off (I have PF2 programmed to toggle SPKR+PH). Maybe
> it's only on some K3's?
Toggle SPKR+PH with audio (e.g. WWV) at normal listening level. Both
of my K3s ramp audio down over about 1/3 to 1/2 second and the audio
gets very distorted just before shutting off.
73,
... Joe, W4TV
On 3/9/2012 6:15 PM, Thomas Horsten wrote:
> Joe,
>
> On 9 March 2012 22:29, Joe Subich, W4TV<[email protected]> wrote:
>
> ]What Wayne would need to do is mute the speaker (shutdown the speaker
>> amplifier) during transmit - and only for voice (AM, FM, SSB) modes.
>> However, if you notice the shutdown behavior of the speaker amplifier
>> it does not turn off instantly and generates a lot of distortion during
>> the process. That ramp down and distortion would be very annoying.
>>
>
> If that's the case then of course it wouldn't make sense to do.
>
> haven't noticed that effect on my K3 and actually when just tested it now
> I don't hear anything other than a very faint click when the speaker
> switches off (I have PF2 programmed to toggle SPKR+PH). Maybe it's only on
> some K3's?
>
> 73, Thomas
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
