I should've clarified. I'm using the Elecraft MD2 desk mic. It has a Y-connector with a 1/4" jack (for the footswitch) connected to the 8-pin mic connector for the front of the K3 (or K2).
In order of preference, here is what I'm curious about their existence: 1. A 1/8" plug to the 8-pin mic jack to connect the 8-pin mic plug to my MD2 (which also allows the footswitch to be used attached to the Y-connector) 2. A 1/8" plug to the 8-pin mic jack to connect the 8-pin mic plug to my MD2 (footswitch us connected to the RCA PTT on the rear, instead) Thanks! -john W4PAH On Sun, Mar 11, 2012 at 9:58 PM, John Shadle <[email protected]> wrote: > Hi all, > Are there any recommended 8-pin to stereo mic cables for the K3 (for > moving the mic to the rear panel), or will just any old one do? > > Thanks! > -john W4PAH > Madison, WI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
