John, I think the neatest converter cable is the K3 itself - just plug the 8 pin connector into the front panel. I don't know of any adapter that will bring out the PTT and AF lines from the 8 pin Foster connector to 3.5mm AF and RCA plugs that can be used on the back panel. Homebrew can provide that, but I know of none "off the shelf",
73, Don W3FPR On 3/12/2012 12:01 AM, John Shadle wrote: > I should've clarified. I'm using the Elecraft MD2 desk mic. It has a > Y-connector with a 1/4" jack (for the footswitch) connected to the > 8-pin mic connector for the front of the K3 (or K2). > > In order of preference, here is what I'm curious about their existence: > 1. A 1/8" plug to the 8-pin mic jack to connect the 8-pin mic plug to > my MD2 (which also allows the footswitch to be used attached to the > Y-connector) > 2. A 1/8" plug to the 8-pin mic jack to connect the 8-pin mic plug to > my MD2 (footswitch us connected to the RCA PTT on the rear, instead) > > Thanks! > -john W4PAH > > On Sun, Mar 11, 2012 at 9:58 PM, John Shadle<[email protected]> wrote: >> Hi all, >> Are there any recommended 8-pin to stereo mic cables for the K3 (for >> moving the mic to the rear panel), or will just any old one do? >> >> Thanks! >> -john W4PAH >> Madison, WI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
