No. The K3 cannot control the KPA, so this is not feasible. If you want to use the KPA with remoterig, you will need to set up a separate serial communications channel between the remote computer and the KPA.
Note that while the KPA sends the K3 information, the K3 does not talk back to the KPA. The KPA does listen to the K3's band pins, but this does not provide reliable information to allow communications. Jack B, W6FB On Mar 14, 2012, at 10:04 AM, David F. Reed wrote: > Is there a command (or maybe will be made available) that can act as > the > OPER/STBY switch on the KPA500 via the K3, to make that work using > RemoteRig? > > Perhaps I missed something? > > Thanks & 73 de Dave, W5SV > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html