Molded connectors- no problem, make the connection in the cable behind the connector. That is, strip a short section of cable, find the right wires, use them.
73, doug On 14-Mar-12 21:29, D Joyce wrote: > Hi Brandon: Since the KPA500-K3 Aux Cable that is currently supplied with > the KPA-500 has molded connectors, its difficult (or impossible) to modify > to add the wire as described by Bob. Will Elecraft, in the future, make > available an alternate Aux cable with this additional wire? > > 73, Doug Joyce VE3MV > > ----- Original Message ----- > From: "Brandon Hansen"<bran...@elecraft.com> > To: "David F. Reed"<w5sv.d...@gmail.com> > Cc:<elecraft@mailman.qth.net> > Sent: Wednesday, March 14, 2012 3:15 PM > Subject: Re: [Elecraft] KPA500& RemoteRig > > >> Hello Dave, >> >> You'll have to wire some pins up manually and create a macro to >> control the KPA500. I have attached a document by Bob Wolbert explaining >> this setup in more detail. Let me know how it goes for you. >> >> 73 for now >> Brandon Hansen, KG6YPI >> K3-Remote Support >> Elecraft >> >> On 3/14/2012 10:04 AM, David F. Reed wrote: >>> Is there a command (or maybe will be made available) that can act as the >>> OPER/STBY switch on the KPA500 via the K3, to make that work using >>> RemoteRig? >>> >>> Perhaps I missed something? >>> >>> Thanks& 73 de Dave, W5SV >>> ______________________________________________________________ > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html