Pete, Sounds like you have "MKR B" turned on.
You can move it with the "Select" knob and you can turn it off by holding the "MKR B" button down. BTW, if you were to tap the "Select" knob your B VFO will move to the frequency of the purple line. Rick K6LE On 3/20/2012, at 5:39 , Pete Meier <[email protected]> wrote: > Ok folks, > > I'll try this question again. On the P3 display there is a purple line that > move out or in when you set the SPAN width. This is NOT the VFO A or B marker! > I would like to understand what it signifies and if there is any control over > it's position other than the SPAN setting and why. > I find on some bands it up the scale, like on 20 meters CW, with Span set at > 40 it's way up at 14.186.00 when I am at 14.010.00 > But when I switch to 30 meters CW Span at 40 also its at 10.115.45 while on > 40M CW at 40 Span it's at 7.008.00 > So it confounds me what it signifies as it varies so much between bands at > the same settings. > > Please politely enlighten me. > > Thanks, > > Pete WK8S > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
