Try restoring an old configuration and/or upgrading the firmware with the K3 utility from a PC. Sounds not so good to me though...
73, Thomas M0TRN On 24 March 2012 00:11, M. <[email protected]> wrote: > My K3 has lost its mind. > > The K3 has been sitting off the operating table for a couple of months > (sacrilege I know!). Tonight I hooked it back up and powered up and while > the display looks ok, none of the buttons function as they should. Most of > them do nothing, others are mis-mapped, i.e. Mode ^ toggles ANT1/2, Mode > (dwn) toggles RX/ATT, XMIT turns the preamp on and off ..... > > Tried the Shift/Power Up trick to reset and no joy. Of course it doesn't > respond to any serial communications.... Checked the internal coin cell and > its ok ... > > Any tricks I'm missing? Hopefully not a trip back to the mothership. > > 73, Mike N4GU > K3 #01710 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
