Thanks for the suggestions, but can't establish serial communications with it and can't get to any of the menus from the front panel. It just toggles a few items with the wrong buttons.....
73, Mike N4GU --- On Fri, 3/23/12, Thomas Horsten <[email protected]> wrote: From: Thomas Horsten <[email protected]> Subject: Re: [Elecraft] K3 reset/reboot To: "M." <[email protected]> Cc: [email protected] Date: Friday, March 23, 2012, 8:18 PM Try restoring an old configuration and/or upgrading the firmware with the K3 utility from a PC. Sounds not so good to me though... 73, Thomas M0TRN On 24 March 2012 00:11, M. <[email protected]> wrote: My K3 has lost its mind. The K3 has been sitting off the operating table for a couple of months (sacrilege I know!). Tonight I hooked it back up and powered up and while the display looks ok, none of the buttons function as they should. Most of them do nothing, others are mis-mapped, i.e. Mode ^ toggles ANT1/2, Mode (dwn) toggles RX/ATT, XMIT turns the preamp on and off ..... Tried the Shift/Power Up trick to reset and no joy. Of course it doesn't respond to any serial communications.... Checked the internal coin cell and its ok ... Any tricks I'm missing? Hopefully not a trip back to the mothership. 73, Mike N4GU K3 #01710 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
