I do hr the relays cycling upon pwr up, will ck continuity tomorrow. thanks 73 Dwight NS9I
On 3/29/2012 7:32 PM, Brian & Cyndi wrote: > Hi, Dwight! > > When you power up the W2 and you see the LED's do their test routine, > the relay for the PTT jacks is also exercised. You could use an ohm > meter to measure continuity between the center conductors of the two RCA > jacks and verify they lose it during power up. Also listen for two > cycles of open/closed relay clicking. If none of this is happening, > there may be a problem with the W2 main PCB. > > Brian, W6FVI > > > On 3/29/2012 4:22 PM, DGB wrote: >> I just put together a new W2. I'm finding that the Remote PTT Control >> isn't working. I have the line for the ptt to the amp from the rig >> broken and plugged into the two ptt ry rca jacks. Text says it should >> break that line or the ptt when you encounter high swr but it don't. In >> the configuration utility I have alarm turned on. What am I overlooking? >> >> 73 Dwight NS9I >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
