I have both DXLab and the MK2R+ set up per the documentation in both. Yet, the MK2R+ busy light indicating two radios on same band comes on constantly. The second radio is never turned on, yet the problem occurs constantly. Cycling power on the MK2R+ solves the problem for a few minutes - any QSY of the K3 causes the MK2R+ busy light to come on and lock out transmission.
Since every setting is per both the Microham setup instructions and the DXlab set up instructions, in my experience the MK2R+ and DXLab do not work well together. I don't have this problem with N1MM or HRD software and never had the problem with DXLab before I used the MK2R+ so all signs point to the combination of the two not working. Others have had the problem and it was solved by upping the data rate to 38.400 - that did not solve my problem. John K3TN Joe Subich, W4TV-4 wrote > >> I actually switched to DXLabs and found the K3 interfacing much >> better - but it has a problem with my use of the Microham MK2R+ >> which I've been unable to solve - so back to HRD. > > As one who uses DXLab Suite. MK2R+ and the K3, there is no issue with > DXLab Suite and MK2R+ when both products are used according to their > documentation. AA6YQ has been very helpful in working out any issues > with control. The only minor inconvenience is that once both rigs > have been started turning of either one will cause Mk2R+ to lock out > transmit; this is a safety design to prevent manual transmission with > both rigs on the same band and is easily handled by momentarily cycling > power on the MK2R when turning off one rig. > > > -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Firmware-4-48-release-stable-in-use-tp7417236p7424319.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
