Keith, I think you'll find that it is NaP3 that is doing this. NaP3 has default filter settings for each mode and restores those filter settings every time you change modes. This happens regardless of whether the mode change is initiated from NaP3, from the radio, or from other control software.
If all you want is panadapter software without the radio control features of NaP3 (for example, if you are using another radio control program such as DXLabs Commander), you might want to investigate using a panadapter program that does not change radio settings other than the frequency, such as TRX-Pan. 73, Rich VE3KI AG6AZ wrote: > I have been noticing that sometimes if I cycle through the modes on the K3 > from USB \ > back through to USB (including cw, data, AM, FM and back to USB) or turn on > either \ > Power SDR or Na3p my filter settings change and sometimes considerably. This > can \ > happen if I stay within the same band or when I change bands. > > It does not usually bother me too much but it is starting to concern me a > little. Is \ > there some type of setting that I need to lock in so as I change mode the > filter \ > settings remain constant. I would think it should resort back to the previous > or last \ > setting I was at when I return to the mode and should not change just because > I turn \ > on Na3p. Any thoughts on this would be great. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
