Hi, Paul it just did it again. This time switching to +-50 with a function key. What I have noticed is that if you continue to rotate ref level clockwise, the SVGA signal goes lower and lower. It now displays -145, and the signal is just peaking above this.
Change the span and it is ok again. I just found another bug. Keep increasing the ref level (clockwise) and everything is fine for a while. The signal goes higher as expected on both the P3 and SVGA, but keep doing it...As you get down to -145, the P3 has the signal off the top of the screen, but the signal on the SVGA keeps going lower. The SVGA now shows from -140 to -165, but the signal has dropped below the 165. You can just barely see some signal peaks rising above the baseline. I bet the issues are related. -- View this message in context: http://elecraft.365791.n2.nabble.com/A-few-bugs-in-the-P3-SVGA-tp7431371p7431532.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
