Just to be sure .. you are HOLDing the MENU button to try to get to
config, right? Two taps won't get you there....
73,
~iain / N6ML
On Sat, Apr 7, 2012 at 11:53 PM, Dave (K7DRT) <[email protected]> wrote:
> I just finish assembling my K3/100.
>
> All went well until that last step of installing the KPA3. Now if I attempt
> to go to the CONFIG menu the radio beeps (It cycles from normal to main). The
> config menu never appears.
>
> I updated firmware using the K3 Utility. The problem still exists.
>
> The utility transmit calibration menu has the 50 watt test not highlighted
> (not available).
>
> I will look at responses to this before pulling the KPA3 out.
>
> Thanks and 73,
>
> Dave (K7DRT)
>
> Tucson, Az.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[email protected]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
