Robert, If you are seeing only the bluetooth ports, then the USB/Serial driver is either too old or not installed properly on Snow Leopard. What type of USB/Serial adapter are you using? If it is a Prolific based device, you will need to install the most current driver. This one:
http://w4smt.com/KX3/md_PL2303_MacOSX10.6_dmg_v1.4.0.zip If it is a FTDI based device, install this one: http://w4smt.com/KX3/FTDIUSBSerialDriver_v2_2_17.dmg This should solve the problem. David, W4SMT --- On Tue, 4/24/12, Robert Galambos <[email protected]> wrote: > From: Robert Galambos <[email protected]> > Subject: [Elecraft] MAC KX3 utility > To: [email protected] > Date: Tuesday, April 24, 2012, 11:52 PM > tried the mac version of the KX3 > utility. it did not work > > and here is the senerio. > > i have fusion. running windows 7 i have no problem > connecting to the > utility. it recognizes the USB driver ( in my case COM3) > update firmware > etc works > > so now after installing the USB driver on the mac side, the > error > message comes back KX3 not responding when i test the > connection. > > in this case i only have two Bluetooth port options aand > niether work. > > running snow leopard > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
