Try the REF LVL control. matt W6NIA
On Thu, 03 May 2012 22:50:23 +0000, you wrote: >Well, more-or-less fixed. >W4TV was the first to suggest setting all the RS-232 rates to 38400, and >now the communications problem is fixed. Hooray!! >Now to download the new firmware (it came with 1.13). > >One last problem: >The IF display is off the bottom of the screen - I can only see the peaks >of the stronger signals (and not 7O6T). >I just did the IF output gain mod, and at one point the displayed spectrum >rose above the baseline, but it's gone back down again. I don't seem to be >able to find a setting that would change the 'vertical position' of the trace. >While adjusting the "SCALE", the trace pops up for a second or so, then >disappears back down again. > >Tnx for all your help. > >Ralph, VE7XF > >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
