Didn't someone else have this issue recently? What is your serial number. I believe there were issues with the pins on this board.....I could be mistaken. DeOXit might be a cure.
Mike W0MU W0MU-1 CC Cluster w0mu.net On 5/4/2012 9:38 PM, Steve Reed wrote: > Today my trusty K3 developed a strange and sudden problem -- I can't turn > the power output past 12 watts -- the KPA3 isn't clicking in! It was > working perfectly yesterday, but today not so well. Went through all the > menus, even tried resetting the radio from scratch and re-enabling the KPA3 > in the config menu. The fan test works fine, and the PA test works fine > too (I can hear the relay click). But going past 12 watts with the power > control no longer works. > > Anyone seen this before and know what the cause may be? > > Steve, AI7AZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
