Thanks for the speedy replies. I should also add that the only thing I did was remove my K3 from the shack and take it with me for use at a remote location for the 7-land QSO party this weekend. I gently put it on the car seat and drove to the remote site here in Arizona. When I plugged the K3 in, the power output wouldn't go above 12 watts. It was moved around, but not roughly in any way. I took off the top cover and checked the voltage at the PA -- the 12v was present. Also, when I turned on the rig I received some strange"High Current" and 12v alerts and then those went away. RX is good and the rig otherwise operates fine, but anything about 12w is a no-go.
Steve, AI7AZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
