Hi Guy, Lyle also contacted me and it's appearing that AGC THR at 16 is not allowing a 15 db signal (P3) to not get notched. It works beautifully at THR 7, completely gone.
I sat and watched as both DSP were updated and it shows the appropriate codes on the display. It's likely along the lines of me not fully understanding what I'm doing. ;-) 73, Rick -----Original Message----- From: Guy Olinger K2AV I have 4.51 in and the auto notch is working fine. Did your log on the utility show the DSP transferring as well? You need to use the transfer all files. On my CONFIG: FW REVS do I have uC=04.51, d1=02.76, d2=02.76, FL=01.15, dr=01.03 I checked the contents of the zip in the beta directory with the zip of 4.51 distributed to pre-beta testers and they look the same. 73, Guy On Mon, May 14, 2012 at 2:03 PM, Rick Bates <[email protected]> wrote: > I think the new AGC sounds great. However, auto-notch is no longer working. > I can manually notch, but auto mode does nothing (LSB). > > Firmware is 4.51 and I've also installed the latest DSP firmware (in both > DSP). I've also cycled the power, no change. > > AGC DCY Nor > AGC Hold 0.00 > AGC PLS Nor > AGC SLP 000 (tried 001, same results) > AGC THR 016 (tried different values, no change) > AGC F 120 > AGC S 020 > > Rick wa6nhc > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
