HMM. I moved the AGC slope to 20 and then went listening. Was working somewhat, but not well. HOWEVER, when I cycled the notch to MANUAL, then OFF and then ON, it worked just fine. ????
73, Guy. On Mon, May 14, 2012 at 2:59 PM, Rick Bates <[email protected]> wrote: > Hi Guy, > > Lyle also contacted me and it's appearing that AGC THR at 16 is not allowing > a 15 db signal (P3) to not get notched. It works beautifully at THR 7, > completely gone. > > I sat and watched as both DSP were updated and it shows the appropriate > codes on the display. > > It's likely along the lines of me not fully understanding what I'm doing. > ;-) > > 73, > Rick > > -----Original Message----- > From: Guy Olinger K2AV > > I have 4.51 in and the auto notch is working fine. > > Did your log on the utility show the DSP transferring as well? You > need to use the transfer all files. On my CONFIG: FW REVS do I have > uC=04.51, d1=02.76, d2=02.76, FL=01.15, dr=01.03 > > I checked the contents of the zip in the beta directory with the zip > of 4.51 distributed to pre-beta testers and they look the same. > > 73, Guy > > On Mon, May 14, 2012 at 2:03 PM, Rick Bates <[email protected]> > wrote: >> I think the new AGC sounds great. However, auto-notch is no longer > working. >> I can manually notch, but auto mode does nothing (LSB). >> >> Firmware is 4.51 and I've also installed the latest DSP firmware (in both >> DSP). I've also cycled the power, no change. >> >> AGC DCY Nor >> AGC Hold 0.00 >> AGC PLS Nor >> AGC SLP 000 (tried 001, same results) >> AGC THR 016 (tried different values, no change) >> AGC F 120 >> AGC S 020 >> >> Rick wa6nhc >> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
