Wouldn't that display be relative to the band edge, not absolute? Only thing changed in the K1 between the two modes of thirty meters is a crystal and a capacitor. Everything the rest of the radio has to do is in reference to a band edge, which is against a xx.000 band edge or either 10.000 or 10.100 for 30m. With the 80 kHz the band edge is 10.1.
73, Guy. On Mon, May 28, 2012 at 9:23 AM, Dale Putnam <[email protected]> wrote: > > Ok, I ran outta ideas, so I am referring this to the group, of super > experts here. A K1, on 30m, narrow vfo, (80mhz) cal op, and b2 chosen to > be 10.1 however, when selecting the band, the display show 10, then 018, > then 18.1. That leads one to think it is working on 10.018.1 yet it is > really on 10.118.1 The tx and rx are correct. It is the display flash of > 10, then 018 and specifically the 0 that is at issue. Any thoughts? Thank > you very much and have a Safe Memorial Day. > > --... ...-- > Dale - WC7S in Wy > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
