> A K1, on 30m, narrow vfo, (80mhz) cal op, and b2 chosen to > be 10.1 however, when selecting the band, the display show > 10, then 018, then 18.1. That leads one to think it is > working on 10.018.1 yet it is really on 10.118.1 The tx and > rx are correct.
You must select the B2 function in the menu. What you see now apparently is 10.0, and you want it to be 10.1. To make that swap, while 10.0 is shown, PRESS AND HOLD the BAND/DISPLAY button until you see 10.0 change to 10.1. Exit the menu to get back to the VFO indication and you're done. This is in K1 manual on page 39 left side middle page. It is also on the Quick Reference Guide on the last page of the manual. 73, Mike / KK5F ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
