Hi David, On Wed, 2012-05-30 at 21:14 -0700, David McClain wrote: > Hi, > > A few weeks ago I upgraded my P3 and K3 to firmware P3 MCU: 1.16 and > K3 MCU: 4.48. Since then, when I try to observe my Rb oscillator's 5th > harmonic at 50 MHz, the P3 flatlines (no baseline noise at all, just a > flat line), and when I try to adjust the Span of the P3 display it > shows "nan" next to the span readout and refuses to adjust.
"nan" means "not a number." It sounds like somehow the span value got set to an illegal floating-point number. Try doing a "Parameter Initialization" as described in the manual. (Basically hold the LABELS key and tap the POWER key.) Be aware that a param init resets all your function keys and other settings. > Is this a known bug? No I've never heard of that one before. Congratulations on being the first. :=) Alan > Dr. David McClain > d...@refined-audiometrics.com > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
