What Roy says is true. The K2 and K3 use a closed control loop to adjust power output. It starts out at low power after a power on or a band change or a change in the power requested - the actual output power is measured and compared to the power requested, and the drive is adjusted until the two match. It does not take long to come up to the requested power level, but it will not be with the first dit on CW nor the first few syllables on SSB.
73, Don W3FPR On 6/2/2012 11:01 AM, Roy Morris wrote: > I do not believe there is anything wrong with either K2s or K3s that do not > put out a full 100 watts on the first SSB syllable. I have built two K2s > and two K3s, and the ALC action is very similar on all of them. Save your > time trying to do another transmit calibration. I don't think it will solve > anything. If it ain't broke, don't fix it! Roy W4WFB > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
