Hi Brian, The problem you described after band changes or power level changes is ABSOLUTELY a function of the TX gain setting. But the automatic setup through the K3 utility might not solve the problem for you. In that case you have to do a manual adjust. I had to do this on two bands for my amplifier.
You can review the manual setting procedure at the top of page 62 in the K3 manual in the CONFIG:TXGN area of the configuration summary. You have to first turn off CONFIG:TX ALC before you can make the manual adjustment. Don't forget to turn it back on. 73, Mike K2MK alsopb wrote > > Guys, > > I may be imagining things, but this effect seems to always be there with > my K3. My perception is that it is not just limited after band changes > or power level changes. It is especially evident when running a big amp > that has a fast display of output power. > > Where it may matter is in contesting. You want them to copy the first > letter of your call right the first time. You want the first dit/dah to > be loud. > > Yes, my K3 has been through the RF power calibration. > > I'm going to have to look closer at this. > > 73 de Brian/K3KO > -- View this message in context: http://elecraft.365791.n2.nabble.com/Problems-with-Power-Output-tp7556965p7556970.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
