The problem is that the K3 does not produce good CW when the TX delay is set to more than about 14. Nothing to do with QSK in this case.
On 6/7/2012 5:43 PM, Rick Stealey wrote: > > >> >> This is not a good idea for CW operation, unless you keep the speed below >> maybe 20 wpm. >> The extra TX delay will severely upset the timing of CW elements (with >> either an external >> or internal keyer) at higher speeds. > > You're thinking of QSK, Vic. I don't run QSK, just semi break-in (or vox as > Ele. calls it). Same > way people have been running theirL4s and L4Bs on cw for 46 years! The TR4 > wasn't qsk. The > timing is only an issue on the first dit, then the relay stays activated. No > problem. > > Rick K2XT > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html -- Vic, K2VCO Fresno CA http://www.qsl.net/k2vco/ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
