Don, This is a K2, not a K3. Can I use the K3 terminal utility you mentioned? I am using TeamViewer to remotely access the rig, running HRD with an FTDI-based USB/serial interface to the K2.
Unfortunately, I can not get physical access to the rig right now. I am able to send other commands, such as Get Frequency (FA;). I was hoping my syntax was wrong or I had the wrong code to change this value. If it is a link problem, no CW for me for now. 73, Tom KG3V On Tue, Jul 3, 2012 at 11:03 PM, Don Wilhelm <[email protected]> wrote: > Tom, > > It may be an HRD problem or a problem with a USB to serial adapter. What > happens if you issue the command with K3 Utility terminal page. That will > tell you whether to look toward the K3 for the solution or toward HRD. > > Are you running HRD through LP-Bridge? If so, that is another possible > block. 90% of the K3 commands work through LP-Bridge, but not all - this > may be one of them (I really don't know, I am just guessing). > > 73, > Don W3FPR > > lOn 7/3/2012 10:44 PM, Tom KG3V wrote: > >> I am trying to change the "INP" Menu setting on a remotely-operated K2. >> It is >> currently in the Paddle-reverse mode, and I need to change it to HAND. >> Looking at the K2 Programmer's Reference Manual, It looks like I can send >> "SW41;UP;" or "SW41;SW01;" to do this. When I send these commands using >> Han >> Radio Deluxe, I get an [error] returned and the value does not change. >> >> Can anyone see a mistake in my commands? Probably missing something >> obvious. >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
