I'd also like to mention that for Mac users DL2RUM's RUMLog also has K3 Macro support.
In the K3 control panel there is space for 12 Macros. Now that I think about it I will have to try some of these "triple macros" in a couple of the slots I have left over. Rick K6LE On 7/11/2012, at 8:31 , Jim N7US <[email protected]> wrote: > I agree it's very cool to be able to program a toggle macro. I just wanted > to mention that the same can be accomplished in DXLab's Commander rig > control module, with which you can have either eight or sixteen > "user-defined controls." > > I have two that each switch between a mic on the front panel jack and one on > the rear and also select the desired VOX gain, mic gain, compression, TX EQ, > and set the gain at high or low. Another switches between two power levels, > and others turn on/off speakers, audio mute, VOX, and spot. They use color > "LEDs" to indicate the state. > > The user-defined controls are in the files folder of the DXLab Yahoo > reflector, > http://groups.yahoo.com/group/dxlab/files/Command%20Sequences%20%26%20Slider > s/Elecraft/ . > > Commander's UDCs have the ability to have a comment line for each line of > the macro, as Stewart described below. > > 73, Jim N7US ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
