Terry, It is possible - recall that many interface boxes come plugged for mic level output which is not nearly enough to use at the K3 Line In. Most of those interface boxes do make provision for increasing the level of the audio output. Yes, it is something to be checked.
73, Don W3FPR On 7/13/2012 11:55 AM, Terry Schieler wrote: > Don, > > Along this line, I think I see that the Line Out level (Mic control) in Data > A mode on my K3 needs a bit of "tweaking" when changing bands to get the ALC > level to maintain the 4 bars with the 5th flickering. Does this sound > normal? Could it be the reason for someone like Bill (below) to not get > power out with PSK31 on some bands but get it normal on others? > > Terry, W0FM > > > > -----Original Message----- > From: Don Wilhelm [mailto:[email protected]] > Sent: Friday, July 13, 2012 9:18 AM > To: Rowland R Johnson > Cc: [email protected] > Subject: Re: [Elecraft] Using PSK 31 with my K3, and Ham Radio Deluxe > > Why would one want to set the mode to USB when the K3 provides DATA A mode > which is the same thing except that compression is automatically set to zero, > the equalization is turned off, and the input level can be set to Line in and > the level remembered so it is almost automatic once set up. > > In answer to the original question, check the data submode - that is a per > band setting. > > 73, > Don W3FPR > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
