On Thu, Jul 19, 2012 at 1:14 PM, Don Wilhelm <[email protected]> wrote:
> That small speaker - if driven to high volumes *will* distort - there is > nothing that can be done about that. > As far as the mechanical vibration, that is quite another thing. > I'm definitely not reaching the speaker's limits, as I can get very clean output from it at even higher volume as long as I apply pressure to parts of the case to dampen the vibration. The speaker itself is no slouch. I've got to do more checking on this mention of the "gap" so I can be sure where it's supposed to be. It looks like the square mounting gasket is snug right up against the enclosure at the moment but it's not clear to me if that's where this gap is supposed to be. I expect a quick Internet search will reveal the answer, so I'm off to do that. Thanks, --Andrew ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
