Sounds like you have somehow mis-configgured your filter(s). Try using the K3 Utility and verify your filter settings. Make sure you have selected the 2.7 KHz filter for SSB TX. Can we assume you have a 400 hz filter installed for CW?
...bill nr4c On Mon, 23 Jul 2012 05:33:20 -0700 (PDT), ac8jd wrote: > I have had my K3 on the air for about a month now. I operate 95% CW > and feel > comfortable with how to operate this rig on the air in that regard. > I have > not had much time to spend getting acclimated with the rig on SSB > until this > weekend. > > I spent a great deal of time my first week adjusting my EQ for SSB by > listening to my self through the headphones and like where I dialed > it in. > However, when I get on the air, stations are telling my my bandwidth > needs > to be opened up. The reports I am getting are that I am at > 400-600hz. A > couple of them have recorded and played it back for me and they are > right. > > I have been through the menu and google, and cannot find anything > that tells > me how to adjust the TX SSB bandwidth. From what I can tell the rig > should > by default be opened up all the way to what the stock filter is which > for me > is the 2.7. > > Any ideas? > > AC8JD > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
