When I transmit my buffer I am told that the first four characters of the first word in the string are not being transmitted. The string on my K3 display shows that all characters are scrolling correctly. I went into the setup screen and changed the timeout from 0 to 3000 thinking that would cure this problem, but it appears not to have corrected it. What would cause the first word to be shortened, and what might be the cure?
Also, when I go from one data mode to another the cursor can change several Khz up or down from the center frequency. I am sometimes able to get it back to center if I change the mark and space pairs with the PITCH control. Once the cursor is centered I can go to other data modes and it stays near the center line. I am new to the data modes so I must not be doing something right. Any help to enlighten me would be appreciated. Roy Morris W4WFB ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html