Yes, indeed. One of the Chinese pig-tail adapters was shorting the two signals.
I changed adapters and gave the program some time to run and cancel out images and it works much better now. I still have some recurring spurs that run up and down the band chasing the center frequency so there's work remaining to be done. Buck k4ia K3 # 101 KX3 #715 On 8/18/2012 6:39 AM, Stephen Prior wrote: > Both of the 3.5 to 2.5mm pigtail adapters I bought from Amazon were not > wired correctly, with no connection at all to the ring (if I remember > correctly). Cheap doesn't always pay in my Experience! > > 73 Stephen G4SJP > > > On Saturday, 18 August 2012, Ignacy wrote: > >> I got the same results initially with a laptop using HDSDR. Turned out it >> had >> a mono input. A bit better picture with a default sound card on desktop. >> Then ran sound card calibration in HDSDR to decrease image and the center >> has disappeared. >> >> Now HDSDR works very well; adding frequency display by OmniRig is simple. >> The effective range is 45KHz. Not sure this is limit of my sound card or IQ >> in KX3. >> >> No complains as free I/Q in KX3 is icing on the cake. >> >> Ignacy >> >> >> >> -- >> View this message in context: >> http://elecraft.365791.n2.nabble.com/KX3-Pandapter-woes-tp7561244p7561249.html >> Sent from the Elecraft mailing list archive at Nabble.com. >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] <javascript:;> >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
