HI Guys, I have a used W2 that has the 2kw transmitter that is not functioning properly.
I can get it to read out swr on the led's if it is on the 20w range setting. If I use auto it selects the 20w range and only measures swr. There is no outputs on the led's for the power other then the 1 led being lit. When trying to do a TX as long as I am at 20w or less the swr leds light but again no power led's light up. I have tried both the sensor 1 and sensor 2 ports but it does not make a difference. I has the 12v power on mod done by the previous owner. Anyway are there any ideas on what to look for or is this thing going to have to go to elecraft for repairs. Thanks Don ~73 Don KD8NNU FH#4107 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
