You can put this into a CW memory with the K3 or KX3 Utility. Use the vertical bar character | where you want an IM sent. It has no effect when the memory is sent in CW.
73 de Dick, K6KR -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Bruce Beford Sent: Monday, September 24, 2012 3:54 PM To: [email protected] Subject: Re: [Elecraft] K3 - help rtty pro sign "IM" end of xmt Robert, Keep in mind that it IS a prosign. That is, it should be sent with NO SPACING between the "I" and the "M" So, di-di-dah-dah with NO SPACING. The K3 internal CW keyer is not very forgiving in this regard. I think many people who have reported difficulty recording the CW memories from the paddle can attest to this. GL es 73, Bruce, N1RX > I have tried sending this pro-sign with all variations of speed, > spacing, etc. However, it's very hit and miss. Most of the time the > transmission times out on its own. Every now and then, randomly it seems, the "im" > works and the transmission ends immediately. Most of the time, no. Any > suggestions? Thanks. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
