My K3 has started intermittently going to lower power--usually around 5W. After some online research, I ran the TX calibration in the K3 utility program, and it failed for both high and low power. So clearly something is amiss.One post said Elecraft support had said to reset the TXGN values back to their defaults. Does anyone know what those default settings are?Any chance this is caused by the oxidation issue?FYI here's the failed results from the TX calibration procedure:K3 Tx Gain Calibration data written on 2012-09-25 at 10:48:22K3 Serial Number 03093K3 MCU version 04.51. RS-232 speed 38400 bit/sElecraft K3 Utility Version 1.12.3.2801900 kHz TxGain LP 3603750 kHz TxGain LP 1805366 kHz TxGain LP 3007150 kHz TxGain LP 3610125 kHz TxGain LP 3514200 kHz TxGain LP 1918110 kHz TxGain LP 2121200 kHz TxGain LP 2001900 kHz TxGain HP 4203750 kHz TxGain HP 3805366 kHz TxGain HP 5807150 kHz TxGain HP 8110125 kHz TxGain HP 7614200 kHz TxGain HP 4218110 kHz TxGain HP 4421200 kHz TxGain HP 40Thanks for any help.73 Paula k9ir
-- View this message in context: http://elecraft.365791.n2.nabble.com/K3-intermittent-low-power-issue-tp7563274.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html