I like my Elecraft KRC2 and DX Enginering 8 Pos switch. Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member
On Tue, 9 Oct 2012 21:36:24 -0400, Jim Miller <[email protected]> wrote: >I'm adding a KPA500 and KAT500 to my station equipment. The only coax to >the shack will be a run of LDF5-50 to a TBD remote switch, preferrably with >8 antenna ports. > >Knowing my limitations I'd prefer a means of decoding the K3 band outputs >and controlling the remote switch automatically. An external override to >select an alternate antenna (e.g. an inverted V instead of vertical for >80m). I'd like some indication of what antenna automatically (or active >override) is selected as well. > >I've looked at several devices (top ten, dxe, ameritron, elecraft) and >haven't found something that meets all requirements. Of course I could >start with just a manual unit and built something myself but I'd prefer to >buy a unit due to other priorities. I'm looking for both the shack box and >the remote relay box as well. I've seen several relay boxes that would >likely work but not yet anything for the shack. > >Suggestions welcome! > >thanks > >jim ab3cv >______________________________________________________________ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:[email protected] > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
