Jim, I have an Ameritron RCS-12 conntroller driving an RCS-10L switch, and AFAICT, it meets all your requirements. I'm very pleased with it.
73, Mike NF4L On 10/9/12 9:36 PM, Jim Miller wrote: > I'm adding a KPA500 and KAT500 to my station equipment. The only coax to > the shack will be a run of LDF5-50 to a TBD remote switch, preferrably with > 8 antenna ports. > > Knowing my limitations I'd prefer a means of decoding the K3 band outputs > and controlling the remote switch automatically. An external override to > select an alternate antenna (e.g. an inverted V instead of vertical for > 80m). I'd like some indication of what antenna automatically (or active > override) is selected as well. > > I've looked at several devices (top ten, dxe, ameritron, elecraft) and > haven't found something that meets all requirements. Of course I could > start with just a manual unit and built something myself but I'd prefer to > buy a unit due to other priorities. I'm looking for both the shack box and > the remote relay box as well. I've seen several relay boxes that would > likely work but not yet anything for the shack. > > Suggestions welcome! > > thanks > > jim ab3cv > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
