Mike, The way I read the manual, you are doing it right, and getting the correct results - no error messages.
Note that those menu parameters are not manually adjustable, you just walk through the steps indicated in the manual, and it sounds like you have done that. There are no expected values indicated in any manual that I have here. Can you tell us what you expected to happen (or to be displayed). 73, Don W3FPR On 10/13/2012 4:54 PM, Mike Weir wrote: > I was just wondering if I am the only one having troubles with one of the cal > tests....namely the Transmit bias test. It is just not working for me. I > posted on this site, Elecraft's nabble and even sent an email to Elecraft. > All post have netted no comments at all. In the past I have had great > response to questions this time nothing. Well going to try again below is the > problem I am having. > I was attempting to run the transmit bias test and all that is happening is > both for CW and SSB when I press XMIT on the LCD I get a reading of .04A > ranging up to .09A and Q6 below that. The instructions say this test is to > take between 3-10 sec my test was into 1.5 minutes. The LCD just continued to > role between .04A and .09A. I tried SSB and the same thing happend just the > numbers were from .08A-.18A again with Q6 below the reading. I was not > getting an error message and there was nothing on the BNC connector and I did > unlock the TX Bias menu. > Mike > VE3WDM > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
