Mark, I believe that the parts list errata for the KXBC3 is wrong. Those are supposed to be flat head screws. I submitted an error correction on Friday to Elecraft and got an acknowledgement. Other then that, I did not find anything awry from the regular assembly instructions.
phil K7PEH On Oct 14, 2012, at 10:53 AM, Mark Hogan <[email protected]> wrote: > The 2-56 screw that I took off the battery retainer, is that the same screw I > use to hold in th KXBC3 and do I reuse that spacer? If not I must have the > wrong screw in my parts kit. I have two 4-40 by 3/16 and a very tiny 3/16 pan > head that does not screw into anything. > > Mark Hogan > N5OBC > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
