Hi folks, I made up a serial lead today to run from a window 2k computer which has a serial port. I've been using a Prolific USB / RS232 converter, which is very noisy. This, however connects to the K3 using HRD software and works correctly. The lead I made up uses 3 wires as the K3 manual suggests. There is no crossover. HRD will not see the K3. I tested the lead by connecting the USB converter to it and it worked perfectly with the new lead - so I don't think my lead is the problem. I tried all the available com ports (the USB lead works on Com 8) the RS232 should be on Com 1 or Com 2. Any suggestions? 73 -- John Petters www.traditional-jazz.com Amateur Radio Station G3YPZ ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
