On 10/13/2012 08:32 PM, Matt Maguire wrote: > On 14/10/2012, at 1:49 PM, Don Wilhelm <[email protected]> wrote: > >> I recommend that all users do the refinement. > > With the new per-band alignment settings introduced in the latest firmware, > this is probably not a bad idea.
Wow, per-band alignment? Is this for the RX sideband gain/phase nullification? I did that when connecting my KXFL3 (purchased separately, so required to do). However, I only did it using the rather cool little white wire "antenna" loop included by Elecraft with the KXFL3, which sniffs the 16MHz clock of the board, using that as a signal source. If per-band alignment is now possible to do, what are the recommendations for using other frequencies besides 16MHz? This will be difficult for me, because I don't have a signal generator that can create an artificial "known good" signal for any other bands. Thank you! Josh K6JSH (formerly KJ6PVN) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
