Page 31 of the owner's manual states that if you install a KXFL3 during kit assembly, you need to run the receive sideband calibration on page 32. I don't think this was done at the factory, as my cal values were quite a bit different from the default values in the rig.
Mike On 10/13/2012 08:50 PM, Phil Hystad wrote: > OK but I just looked in the assembly manual and the user guide and I did not > see anything about NOT doing the configuration/calibration of the filter. > Where is this located? I mean, the instruction saying that > configuration/calibration of the filter is not required if shipped with the > KX3. By the way, even though it was shipped, I did install it and the > configuration instructions say that the procedure must be performed whenever > the filter is removed or replaced. > > What is this configuration file you mention that is associated with my serial > number. Is this something I need to request? > > Also, if this too is documented somewhere I must have missed that. I do > admit to not reading the user guide cover to cover yet. > > phil > > > On Oct 13, 2012, at 5:31 PM, John Strandberg <[email protected]> wrote: > >> Yes. This is correct and Elecraft has a configuration file for your KX3 by >> your serial number including configuration/calibration data for any options >> such as the filter. >> >> On Sat, Oct 13, 2012 at 8:24 PM, hawley, charles j jr >> <[email protected]> wrote: >> Didn't the assembly manual say the if the filter is shipped with the KX3, >> the filter doesn't need to be calibrated? >> >> Sent from my iPad >> >> On Oct 13, 2012, at 6:57 PM, "Phil Hystad" <[email protected]> wrote: >> >>> Gang, I just finished putting together my KX3 with the filter option, ATU, >>> and battery charger. I am just about to do the calibration for the filter >>> but I noticed that there is an LED or something that flashes, maybe once >>> per 2 seconds?, inside the KX3. I can see it through the key/paddle plug >>> opening. >>> >>> Does anyone know what this is? Is there meaning to the flash? Is it >>> important? >>> >>> Thanks, >>> >>> 73, phil, K7PEH >>> >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
