On 20/10/2012 13:42, stan levandowski wrote: > Interesting question, Charles. I just plugged my INTREPID into my K3's > "KEY" jack and got only dits, no dahs. All of my other bugs work properly. > > All of my bugs - including the INTREPID - work properly when connected > to my external keyer (Begali CW Machine) which I use instead of the K3 > keyer. > > So I never noticed this before! > > Now that I know, I'll have to make time to figure out the wiring because > "it bugs me" ;-) > > 73, Stan WB2LQF > > On Sat, Oct 20, 2012 at 1:34 AM, chas wrote: > >> Please can someone tell me how to connect the Begali Intrepid key to >> the K3. >> >> TIA - Charles >> ______________________________________________________________
My thanks to those who replied to my question. I now have the Begali Intrepid Key working correctly. The answer to my question is as follows: "Turn the bug onto its back and you will see 3 screws in the connection compartment. 2 are holding the side rails in place and 1 is earth. connect the 2 that are holding the rails together with a jumper and also connect these to the tip of your jack plug. Then connect the 3rd screw to the sheath (ground)of the jack plug. The 2 rails are held above ground by plastic stand-offs." Charles ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
