Sorry - catching up on reading posts that I missed while traveling last week.
I have a 6m preamp from another mfr on my K3, but would consider a PR10/6 combined preamp, if offered. At present I only have a single 6-element 6m yagi pointed toward US West Coast (az=115) so no issue with the 6m band. I will be adding a 1100w 6m PA and QRO antenna relay so the 6m preamp input will no longer connect thru the K3. I hope reinstall my repaired 3-elem 6m yagi fixed toward the NE from tower#2 at 45-foot so a second preamp would work well if it also would work on 10m (Hygain TH3mk4). The K3 ANT1 connects thru a couple manual coax switches for all other bands/amps/tuners/antennas. Next summer I hope to install tower#3 (30-foot) for the 6m 6-elem yagi which is for meteor scatter and eme work. I recently obtained a used rotator for that project. I had to remove my two stacked 3-elem 6m yagis this summer as the upper antenna director came loose and unreachable from the tower. I am redesigning and adding a 11-elem 2m FM yagi bolted to the tower at 45-feet (no rotator). Lower 6m yagi never tuned correctly and will be sold (cheap). Winter temps may affect these plans (currently 19F). 73, Ed - KL7UW ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
