Hello Don There are four settings under the cw mode in Hrd. Cw, and winkey do not work with the K3 alone. The ky and mcw work good with the K3. Mcw is used with vox and the tones key the radio. Only down fall is you have to use the <stop> in macros or click the stop button. The kycw is for elecraft. It will key the radio and use the internal coder to send the morse. Plus without all that relay clicking of an external sound card. So you can use cwky or mcw they both work with the elecraft line. I have it running on a K2, K3, and a KX3. Good luck Gerald On Nov 11, 2012 7:31 AM, "KD8NNU" <[email protected]> wrote:
> I use my K3 with HRD software and have the PTT working with all the > digital modes except CW. > > There are four different drop down types in HRD and I have tried them all > with the PTT. The only way I get CW to work is using VOX. > > This makes no difference if I use DATA Mode, USB or LSB, or CW for the > settings on the K3. > > So the question is what setting am I missing as I can not send CW without > VOX on. Its just computer generated dits and dahs thru a sound card no > different that any other computer digital mode which works fine for me. > > I can live with VOX but then if I forget to turn it off it creates other > potential problems. So basically I am thinking I am missing something in > the setup. > > > > ~73 > Don > KD8NNU > -.- -.. ---.. –. –. ..- > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
