Don, The K3 requires VOX be active to send CW. Please check the K3 user's manual under CW operations.
73, --Ian Ian Kahn, KM4IK Roswell, GA EM74ua [email protected] K3 #281, P3 #688 HRD v5.x/6.0 Test Team On 11/11/2012 8:31 AM, KD8NNU wrote: > I use my K3 with HRD software and have the PTT working with all the digital > modes except CW. > > There are four different drop down types in HRD and I have tried them all > with the PTT. The only way I get CW to work is using VOX. > > This makes no difference if I use DATA Mode, USB or LSB, or CW for the > settings on the K3. > > So the question is what setting am I missing as I can not send CW without VOX > on. Its just computer generated dits and dahs thru a sound card no different > that any other computer digital mode which works fine for me. > > I can live with VOX but then if I forget to turn it off it creates other > potential problems. So basically I am thinking I am missing something in > the setup. > > > > ~73 > Don > KD8NNU > -.- -.. ---.. –. –. ..- > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
