If I'm reading the manual correctly, when I have the config setting SPLT SV set to YES, the K3 should save the split, XIT and RIT information on each band. But, with this value set to YES, and I am split on say 30 meters then change to 20 meters and go back to 30, the sub receiver is still at the frequency it was set for but the K3 is no longer in split mode so I have to press split again to put it into split mode.
This is particularly annoying if I happen to be chasing a DXpedition on one band, change bands to another to work something then go back to the previous band and transmit because I'm not split! Is this a bug or am I missing something else that needs to be set? I would like the K3 to remain in split mode as well as keep the vfo A and B values. Pete, W1RM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
