Wrong, my 2k7 is in FL2 and my 500 is in FL5, both main and sub RX.
Nothing between.
Regards,
Mike VP8NO
On 28/11/2012 20:31, K4ia wrote:
Check your filter locations and make sure they are "selected". As I recall you
must instal the filters in slot 1 then 2 then 3. In other words, no skipping over slots.
Craig Buck
On Nov 28, 2012, at 6:19 PM, "Mike Sanders" <[email protected]> wrote:
Well, I think I have found it. I have not gotten
the filters selected for the sub RX and the rig
keeps going back to a FL1 position. I only
have FL2 and FL4 populated with 2.8 and
400hz respectively. When I go into Bset I
can get to those filters and the RX is FB
but when I get out of Bset it goes back to
one of the filter slots I do not have.
Apparently I need to deselect FL1, 3 and
5 from the sub RX. Not sure How to do that?
Thanks for the tips so far. Any help on the
filter issue appreciated. 73 again.
Mike Sanders
KØAZ
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Cady, Fred
Sent: Wednesday, November 28, 2012 16:55 PM
To: Elecraft Reflector
Subject: Re: [Elecraft] Sub RX no work
Hi Mike,
Make sure the sub rx and the main rx are on the same antenna. Turn Sub on
and then Hold RX until you see MAIN displayed, not AUX.
73 and cheers,
Fred KE7X
Fred Cady
fcady at ieee dot org
-----Original Message-----
From: [email protected] [mailto:elecraft-
[email protected]] On Behalf Of Mike Sanders
Sent: Wednesday, November 28, 2012 3:51 PM
To: Elecraft Reflector
Subject: [Elecraft] Sub RX no work
Greetings All, Well I have just installed a sub RX in a late
K3 (67xx). Before I go back into the radio and quadruple
check my work I just have to ask if I am missing something
in config.
I have audio and control of the sub RX and can even hear
signals through it but very very weak compared to the Main.
All seems OK but just very poor RX. I have selected the
ATU as source of antenna and have my connections there.
(I will go in later and see if I have any thing mis/dis connected).
Am I missing something in config? I have two filters installed
in the sub and NO BPF. No error messages and again it
seems to respond to everything input to it. Even receives
just poorly. Thanks for any help. 73, Mike
Mike Sanders
KØAZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1427 / Virus Database: 2629/5424 - Release Date: 11/28/12
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
