When I answered Paul's question
I was reading from the K3 Owner's Manual (pdf)
(12.4 MB) K3 Owner's Operation Manual, Web Res. (Rev D10, 8/24/2011)
I just did a pdf search of that entire manual, and no where does it give the
info Dale gave us about the + sign in CW indicating the QRQ mode was active.
I also checked the K3 Owner's Manual Errata (pdf)
(61 KB) K3 Owner's Operation Manual Errata (Rev D10-1, 8/24/2011)
and did not find that info........
maybe it's time for an updated K3 Owner's Operation Manual _please_
(yea I know like the guys didn't already have enough on their plates, right?)
On 12/4/2012 8:26 AM, Dale Boresz wrote:
Paul,
In CW mode, the "+" icon indicates that QRQ mode is active. You can toggle it on
or off via the Config menu option "CW QRQ"
In SSB mode, the "+" icon indicates that ESSB is enabled. You can toggle it on
and off via the Config menu option "TX ESSB". Tap '1' to turn it on and off.
It may have other meaning in other contexts or modes, but these are the only two
of which I am aware.
73, Dale
WA8SRA
On 12/4/2012 9:11 AM, Paul VanOveren wrote:
Somehow I now have the "+" icon on the display, lower right, between the
Bvfo and the T for the CW text decode. I know not of how I put it there
and want to know how I turned it on, and how I can turn it off.
Tnx,
NF8J
Paul VanOveren
5911 Snow Av
Alto, Mi 49302
(616) 868-7149
--
GB & 73
K5OAI
Sam Morgan
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
