Aditional information: Once you have tuned the KAT500 to a frequency, the tuner will use it's memory to tune to that frequency any time you return to it or near enough that a re- tune is not required. If, when RF is applied tuning is required, the tuner will activate automatically and re-tune.
Both of my posts under this thread refer to the way my KAT500 behaves. Amateur Radio Operator N5GE ARRL Lifetime Member QCWA Lifetime Member "If tyranny and oppression come to this land, it will be in the guise of fighting a foreign enemy." -- James Madison -- On Wed, 5 Dec 2012 08:27:15 -0800 (PST), KM4VX <[email protected]> wrote: >I think we need further clarification. "Tapping" the ATU TUNE button on the >K3 just toggles between BYPASS and ATU. It does not force the KAT500 to >tune. Do you mean we should HOLD the XMIT button on the K3 to force the >KAT500 to tune or should we HOLD the ATU TUNE button on the K3 to force the >KAT500 to tune. I very much agree with the post that one button on the >KAT500 or one button on the K3 would be better than having to push a button >on both to tune. Of course we still want the KAT500 to memorize the >settings. Thanks ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
